Modular fixturing system的副本

What is a modular fixturing system, and what is it used for?

·A modular fixturing system is a flexible setup that enables rapid machine tool response to diverse and complex machining tasks through the quick assembly of fixture components, drastically reducing downtime for setup. It is most practical for machining small-batch, high-variety parts.

·This approach moves away from the traditional "one machine, one fixture" model. Instead, a single system supports all tooling fixtures, transforming the workflow into an "offline preparation, online machining" process. It turns a five-axis machine tool from an isolated piece of equipment into a responsive, high-output, and stable precision manufacturing center.

Five-axis modular fixturing system

 We offer three types of vises for 52mm chucks: H67, H90X, and H105 (H represents the jaw width), meeting your clamping needs for workpieces of different sizes. The serrated and profiled jaws are suitable for both primary machining and secondary finishing of parts.

52mm workholding fixtures, collets, and three-jaw chucks, quickly compatible with 52mm chucks, for clamping round parts.

 52mm Chuck

·With a locking force of 35 Nm for all 4 rivets, the pull force of all 4 holes can reach 20 kN.
·Repeatability: 0.005 mm.
·Locking method: Manual.
·Material: Alloy steel 58° HRC.
·Positioning spacing: 52*52 mm.
·Load capacity: 100 KG.
·Can be calibrated using the center hole.

This four-axis single-sided bridge plate features mounting holes and a flexible T-slot design. The mounting holes are suitable for 52mm vises and 52mm chucks, and the T-slot design allows for the installation of other fixtures.

96mm Chuck

 ·With a locking force of 35 Nm for all 4 rivets, the tensile force in all 4 holes is greater than 20 kN.
·Repeatability: 0.005 mm.
·Locking method: Manual.
·Material: Alloy steel 58° HRC.
·Positioning spacing: 96*96 mm.
·Load capacity: 200 KG.
·Can be calibrated using the center hole.